Hey
Thought I better put up a pic of the new throttle bodies
36mm bore with fully machined taper up to 48mm
Inside mount injectors with stainless steel fuel rails
Integral air temp sensor
1/8th vac port feeding from both sides
Will accept most IDF hardware
New IDF Throttle Bodies
-
Paul H
- Posts: 748
- Joined: Wed Jan 22, 2003 12:01 am
New IDF Throttle Bodies
You do not have the required permissions to view the files attached to this post.
Real parts=Real Performance-Get Real
Opinion is the medium between knowledge and ignorance (Plato).
Opinion is the medium between knowledge and ignorance (Plato).
-
V8Nate
- Posts: 841
- Joined: Mon Sep 03, 2018 12:34 pm
Re: New IDF Throttle Bodies
They look nice what's the cost for a pair and do they come with injectors?
-
Paul H
- Posts: 748
- Joined: Wed Jan 22, 2003 12:01 am
Re: New IDF Throttle Bodies
I can supply them with injectors I suggest the Pico style which are compact and have a better spray pattern. They are $495 per pair at the moment
due to favourable exchange rate
due to favourable exchange rate
Real parts=Real Performance-Get Real
Opinion is the medium between knowledge and ignorance (Plato).
Opinion is the medium between knowledge and ignorance (Plato).
-
Paul H
- Posts: 748
- Joined: Wed Jan 22, 2003 12:01 am
Re: New IDF Throttle Bodies
I've had questions about fan housing clearance and the answer is there is plenty of clearance with a 30hp fan hosing using
tall straight or offset manifolds but sorry they won't fit with a standard fanhousing
tall straight or offset manifolds but sorry they won't fit with a standard fanhousing
You do not have the required permissions to view the files attached to this post.
Real parts=Real Performance-Get Real
Opinion is the medium between knowledge and ignorance (Plato).
Opinion is the medium between knowledge and ignorance (Plato).
-
Kafer_Mike
- Posts: 493
- Joined: Fri Oct 04, 2002 1:01 am
Re: New IDF Throttle Bodies
Look great, Paul. Email sent. 