Mexi EFI run my 1968CC?

[carguytroy]

Looking at jumping into the EFI pool and I’ve been looking at using the Mexi EFI Induction with a Megasquirt 2 ECU. The engine is a 1968CC I’m in the process of putting together. Cam is a web cams 163, MOFOCO 041 heads, naturally aspirated. Is the Mexico EFI enough for this combo? Mainly concerned if the throttle body is large enough. And what injectors I should be looking at.

[boxer74]

I'm considering the same for my 1776 with CB 2239 cam. I would be using microsquirt. From what I've seen, people have successfully used the mexi kit for up to 2L. I think it would give great torque and drive-ability which is what I'm after. I never rev about 5000rpm.

[H2OSB]

I love the idea of using the mexibeetle EFI. Can someone provide a link that gives a good description of the set up? I really fancy building a 2110, semi hot engine, and want to see if the mexibeetle EFI is practical for my application.

Thanks
H2OSB

[Bruce.m]

Dub shop listed kits of the genuine parts. Intake, end castings, throttle body etc. you also need a special alternator stand which has more space for the intake.

Also www.1600i.de is a good resource on parts, such as the specific fuel pump assembly.

[boxer74]

I may start an EFI conversion thread soon. Converting my 1776 with dual Weber 40 IDF's to the Mexi EFI kit.

[Paul H]

Web163 is too much cam for that intake