Single TB and 2 injectors?

[John S.]

Can micro/Megasquirt control a center mounted single IDF style throttle body with two injectors? Just wondering, since all this Holley Sniper stuff is being used. The IDF looks and fits much better, IMO.
Thanks

[Paul H]

I'm sure any ecu will run 2 injectors but due to the limitations of the end castings and centre manifold you won't gain anything using an IDF over a single 36mm throttle body with one injectors. I posted a dyno test on here a few years ago on this subject

[John S.]

Yes, I understand that the end castings are always a restriction. As they would be with a Sniper set up.

[Paul H]

Yes I voiced my objective critisism of the Sniper systems on the Samba it didn't end well

[John S.]

Ultimately I’m asking for a turbo application.

[Paul H]

Two injectors will help with fuel flow on a turbo but it depends on how much power you want

[John S.]

I just may consider this. The fuel up top would help cool the intake. I think 200hp is a safe and achievable street goal.

[Paul H]

Don't set your sights too high if using stock intake maybe those CB high flow things would work better