CNC master cylinders
-
blue1957
- Posts: 41
- Joined: Tue Nov 17, 2020 7:28 pm
CNC master cylinders
I have 2 perfectly working 5/8" bore master cylinders. They work perfectly and are in great condition. $150 obo
![Image]()
You do not have the required permissions to view the files attached to this post.
-
mlrailguy
- Posts: 378
- Joined: Sat Nov 16, 2002 12:01 am
Re: CNC master cylinders
are these for brake or clutch?
-
Piledriver
- Moderator
- Posts: 22658
- Joined: Sat Feb 16, 2002 12:01 am
Re: CNC master cylinders
The cylinder doesn't know whats it's connected to, but as there are a pair, likely best used for brakes with a balance bar.
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
-
blue1957
- Posts: 41
- Joined: Tue Nov 17, 2020 7:28 pm
-
70 baja
- Posts: 43
- Joined: Wed May 28, 2008 2:21 pm
Re: CNC master cylinders
will these work with willwood pedal assemblies?