Hello,
I will be building a new buggy next winter(4 seater so grandkids can ride too) I am currently in the planning stages and looking for advice and knowledge.
The parts I currently have are:
Aluminum super case
Cima 94mm b p/c (a nos set from the 80's)
84mm Empi crank
5.5 Empi rods
AA 501 heads (42x37 valves)
Engle FK43 cam
I would like to make good torque and plan on 5800 rpm redline.
This will be used in the woods running trails and climbing hills in KY, WV and Ohio.
I am planning to limit boost to 10lbs, this motor will be EFI(microsquirt) and intercooled, would like to run at least 9to1 static compression and can run E85 if needed.
I am not opposed to different heads and cam.
Was considering a T3/T4 hybrid turbo.
Thanks
Kenric
2332 turbo build suggestions
- woodsbuggy1
- Posts: 822
- Joined: Sun Feb 20, 2011 5:15 pm
2332 turbo build suggestions
Good quality is getting harder and harder to find.
- Chip Birks
- Posts: 4011
- Joined: Wed Mar 12, 2008 5:59 pm
Re: 2332 turbo build suggestions
Sounds like a lot of fun to me!
- woodsbuggy1
- Posts: 822
- Joined: Sun Feb 20, 2011 5:15 pm
Re: 2332 turbo build suggestions
Any suggestions on what trim T3/T4? I am thinking about 57 trim but interested in hearing what has worked for others?
Kenric
Kenric
Good quality is getting harder and harder to find.