73 bug non 1303.
Need to upgrade to 8mm, existing is easy but where do I add return line in newish tank, best way to add without causing swarf and ignition of vapour.
Will be using hose as final connect from copper lines.
Thanks
Bruce.m wrote:Cb performance Tee piece fitting for under the tank. Or use a mexican beetle 1600i pump & swirl tank (chunky the find space for it however)
Add a few bits & bobs (keep it below £135 equivalent), then order direct. Shipping will be circa $50 but if the price of parts is under £135 (be conservative with the conversion rate) you don’t pay vat or duty. Above £135 you pay both on the total cost including the shipping.
If you are going EFI the CB “camsync” is great value. Combined with a crank trigger (VW speedshop make a great kit), you can have full sequential set up.
