New TI case (Aluminum)

Tom Simon · Post by **Tom Simon** » Thu Mar 07, 2002 1:59 pm

I have devised a testing methodoligy that I use on my race cases. I would be happy to forward it to anyone wanting to measure one of these new cases. Some machining/inspection skills, precision tools, a milling machine, and a granite surface plate are needed to do it right. e-mail me and I can walk you through it if interested. [email protected]

69bug · Post by **69bug** » Thu Mar 07, 2002 10:36 pm

I WAS JUST THINKING WHY THERE ISN'T A IDENTICAL COPY OF AN ORIGINAL TYPE 1 CASE THAT WAS MADE OUT OF ALUMINUM...COOL

------------------
if you can't find't it...GRIND IT!!!OR...GRIND IT 'TIL IT FITS!

Volksman1 · Post by **Volksman1** » Thu Mar 07, 2002 11:46 pm

guess I'll find out by the end of the month..just ordered my case hehe

JohnConnolly · Post by **JohnConnolly** » Thu Mar 07, 2002 11:51 pm

Just so you guys know, I STRONGLY discourage the use of shuffle pins. they hold things so well, if anything "moves" it snaps off the main web in the case, I've seen it a lot. I feel it's better to save your $ and not have the case break.

John
Aircooled.Net Inc.

Ross · Post by **Ross** » Thu Mar 07, 2002 11:57 pm

Wow these cases sound too good to be true (mind you once i pay for shipping to the uk it probably will be!)
Jake - do the cases use the standard six main studs to mate or what? i didnt understand what you meant by not using thru bolts?
P.s I thought CB had the rights to these beuties...

Ugly Man Dinner · Post by **Ugly Man Dinner** » Fri Mar 08, 2002 12:43 am

because that is too convenient.

69bug · Post by **69bug** » Fri Mar 08, 2002 12:57 am

hahaha...exactly!

------------------
if you can't find't it...GRIND IT!!!OR...GRIND IT 'TIL IT FITS!

CLKWRK · Post by **CLKWRK** » Fri Mar 08, 2002 8:18 am

Dear MR.Simon
I have one of these new brazilian AL cases comming to me in the mail, I will be testing it out for turbo applications. I will be measuring it up as soon as I get it, if its not too much bother, please forward me a copy of your testing methodology......THX,BRY

Jason M · Post by **Jason M** » Fri Mar 08, 2002 6:46 pm

I'm not sure what you mean by no thru bolts Jake? Check out this pic.
http://www.vwparts.net/photos/cases/alc12.jpg

stealth67vw · Post by **stealth67vw** » Fri Mar 08, 2002 6:59 pm

The original ARPM 2 piece case used thru bolts(6-12mm bolts)instead of main studs like the factory cases. This was to relieve the main webs of the added strain of higher RPMs and it is used in all the aftermarket cases used today exept the new aluminum cases.

Callum · Post by **Callum** » Sat Mar 09, 2002 1:07 am

A word of warning for all regarding these ally cases.The heat treat on the aluminium is wrong,the manufacturers Autolinea/Hubner are aware of this problem but rather than melt down and recast they unloaded a couple of containers full to 2 importers in the USA,heat treating the cases cannot be done after final machining ,they have other problems too such as the pressure relief galleys are oversize and the oil pickup pipe is loose.I suspect there will be a lot of disappointed people out there-Do the importers offer any kind of guarantee????

jet-set · Post by **jet-set** » Sat Mar 09, 2002 1:09 am

Does anyone have more pics that they can post of these new cases?

James2 · Post by **James2** » Sat Mar 09, 2002 4:19 pm

If you're going to put down the product, at least have the balls to register and have an email.

Jason M · Post by **Jason M** » Sat Mar 09, 2002 11:09 pm

Here's one for sale on Ebay with some different pictures http://cgi.ebay.com/ebaymotors/ws/ebayI ... 65&r=0&t=0

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Sat Mar 09, 2002 11:51 pm

All these things are what I will be testing for, I have a metallurgist doing the homework for me..

Most definately the non through bolt case will be the death of these engine cases,I WANT to break one, and know I can succeed.

------------------
Jake Raby
Raby's Aircooled Technology
www.aircooledtechnology.com