T4 dry sump oil pumps

not fast enough · Post by **not fast enough** » Tue Jul 18, 2000 8:47 am

Does anyone run a dry sump oil pump on their T4? where did you get the kit? and hwo deos it perform?

ahnendorp in germany have informed me that they nolonger produce their dry sump pumps, who else might be able to help?

Post by **Tom Notch** » Tue Jul 18, 2000 10:31 am

A T1 stock type oil pump will work on a T4, so maybe a T1 scavenge pump can be made to work. Check my site for the T1-T4 oil pump mod. Site listed in my profile.

------------------
Tom Notch

[email protected] · Post by **[email protected]** » Tue Jul 18, 2000 10:56 am

Schadek builds a 2 stage dry sump. Oliver Knuf has them in stock I believe. Oliver was telling me a few weeks ago that he may switch to a dry sump setup. Scat, Schadek, Autocraft, Pauter, and a few others build multi stage pumps. OH yeah, Claudes Buggies has them now as well, but who knows about their?
Steve Arndt

yspect8 · Post by **yspect8** » Wed Aug 09, 2000 6:12 am

I have a 2 stage pump. It is in sections like this -- case piece, 3/16" plate, 1.25" blue piece for oil out, 3/16" plate, end piece with in and out.
??? Between each piece is a .006" gasket. Does anyone know the make of this pump? And where to get these 4 thin gaskets? [A normal case gasket is thicker.] I tried Autocraft, FAT, SCAT already.

GDRBO · Post by **GDRBO** » Wed Aug 09, 2000 2:30 pm

Have you tryed a normal cover gasket?