Would a Line-X type product work as a good under coat

Guest · Post by **Guest** » Mon Jun 23, 2003 12:52 pm

2500 psi?????

Is that accurate? Can I paint it myself, or do I have to get some special type of compressor to give the 2500 psi needed to apply it.

Jason

59buggin · Post by **59buggin** » Mon Jun 23, 2003 12:56 pm

2500 psi?????

Is that accurate? Can I paint it myself, or do I have to get some special type of compressor to give the 2500 psi needed to apply it.

Jason

59buggin · Post by **59buggin** » Tue Jun 24, 2003 8:53 am

Bump!!

Please can anybody verify 2500psi to shoot the line-x onto a vehicle. That seems WAY to high to me

. I could be wrong, maybe 250psi... Please advise!!!!!!!

Jason M

onewheat · Post by **onewheat** » Wed Jun 25, 2003 11:02 am

Yes 2500 PSI. It isn't something you can do yourself. You need the 2-part spray system to mix the resin and catalyst - available to franchised Line-X dealers in convenient 55 gallon drums of each.

Had my truck done in January.

74Shagenwagen · Post by **74Shagenwagen** » Wed Jun 25, 2003 4:28 pm

Yeah...What he said! lol

2500psi isn't generated by the compressor... The pneumatically operated fluid pumps do that. Then, under pressure, the two chemicals are heated to 170 degrees and finally mixed together at the nozzle of the gun.

59buggin · Post by **59buggin** » Thu Jun 26, 2003 8:49 am

Basically what I am asking is, can I do it myself, or do I have to have it done by a specialist??

Jason

Pete65 · Post by **Pete65** » Thu Jun 26, 2003 11:51 am

onewheat wrote:Yes 2500 PSI. It isn't something you can do yourself. You need the 2-part spray system to mix the resin and catalyst - available to franchised Line-X dealers in convenient 55 gallon drums of each.

yeah, but.. can you do it yourself??