H2O rims on an aircooled
-
VW911
- Posts: 352
- Joined: Tue May 23, 2000 12:01 am
H2O rims on an aircooled
Anyone out ther have some pics of your beetle with 17" stock VW, Audi rims?
I just bought some 2002 GTI 17" to go on my 73 super
Who's selling (companies) 5x100 drums and rotors? I have seen the blank ones but I want them pre-drilled
I just bought some 2002 GTI 17" to go on my 73 super
Who's selling (companies) 5x100 drums and rotors? I have seen the blank ones but I want them pre-drilled
- brianwheelies
- Posts: 716
- Joined: Thu Feb 05, 2004 3:14 pm
www.toplineparts.com can get your drums and rotors squared away for you.
- hey its antman
- Posts: 25
- Joined: Fri Jan 28, 2005 8:20 pm
-
Towdman
- Posts: 41
- Joined: Sun May 18, 2003 6:20 pm
I'v got Honda wheels under my stock fenders, with little issues if your wheels have about an offset of about 40 thesy should work with the right suspension parts from topline.
Here http://community.webshots.com/user/towdman
Here http://community.webshots.com/user/towdman
-
VW911
- Posts: 352
- Joined: Tue May 23, 2000 12:01 am
- Kenny2428
- Posts: 2830
- Joined: Thu Aug 22, 2002 12:01 am
-
jasonH
- Posts: 46
- Joined: Wed Jul 10, 2002 12:01 am
Water wheels on my 68.....
I'm rolling 16" 2003 Jetta VR6 wheels and tires. I got the drilled drums with studs from Topline. I had to use wheel spacers in the back to clear the castle nut. They are H&R. I also had to buy open ended bolts from Kragen. Don't buy the closed ones they may offer at topline. I had to grind down the studs on the front end 'cuz the ones they used were too long. I've been rolling on stock fenders for over a year...... turning radius sucks and the tires grab the outers of the front fenders @ high speed bumps in the road... not too safe. I'm going to outfit the front end with a narrowed front beam to tuck the wheels in a bit more. This should be enough clearance, Clarance. I haven't seen another single ride out here in the SoCal sporting H2O wagen wheels. Good luck keepin' it real.