Ford or Rotary adapter kit plate wanted

Bugzlife · Post by **Bugzlife** » Tue Dec 20, 2005 10:42 am

Ford or Rotary adapter kit plate wanted - good used one
I want to get a used complete ford or rotary engine conversion plate kit and flywheel for the 2.3 ltr ford banger or 12a 13b. let me know thanks
send me a PM

MikeVW · Post by **MikeVW** » Tue Dec 20, 2005 3:36 pm

Here are some:

http://bb.bbboy.net/vwengineconversions ... m?forum=12

Mike

Bugzlife · Post by **Bugzlife** » Wed Dec 21, 2005 7:35 am

Thanks dude!, I contacted the dude in Florida, maybe I can get the hole shiittbangg for less than $800

Guest · Post by **Guest** » Tue Jan 03, 2006 5:18 am

Hi Bugzlife,

I might be too late...but I have a complete Ford 2.0L Zetec conversion package available.

The Ford Zetec is from a 2000 Focus with only 19,000 miles. Stock.

included; NEW Webcon (U.K.) complete dual Weber 45 DCOE carb kit which includes the ECU, linkage, sensors. CB rotary fuel pump.

Modified oilpan by Superformance (engine is now clocked @ 12 o'clock, so a stock oil pan is wrong, wrong wrong)

KEP adapter, flywheel, pilot bearing, and yes even the instructions!

FocusSport 4-2-1 headers modified to fit as shown in the pictures. Spin Tech muffler.

This is a 150-165 HP setup. With a Ford Racing head and cams 180-190 HP.

The Weber kit alone goes for $1300. +

I am switching to a 2.5 Turbo Subaru.

Asking $1600.

Thanks for looking.

Olli

Olli · Post by **Olli** » Tue Jan 03, 2006 5:23 am

Sorry, I did not realize that I was not logged in.

Also incuded is a new alternator, custom idler pulley, correct serpintine belt.

Olli

Guest · Post by **Guest** » Tue Jan 03, 2006 7:56 am

^^^ swaeeeet. thought I would never see a newer dohc engine with dual side drafts. that is way cool.

olli so your going to the sti engine? I heard the 2.2turbo has more potential than the 2.5 engine. I know the hp is higher in the sti, but the stock bottom end on the 2.2 has seen 600hp on stock internals. I have a few friends that have wrx's and they tell me the big hp numbers start with the 2.2. whats your input?

good work man. keep us updated on that monster

6t9