2.0 ltr engine

Passatman · Post by **Passatman** » Tue Jul 18, 2006 11:35 am

Can the 2.0ltr engine make 140ftlbs of torque. I have 44idf webers for this engine. The heads are 2.0ltr bus heads, what cam should i use.

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Tue Jul 18, 2006 11:49 am

Okay.
is is to remain a 2.0, or is a bigger engine being based from the 2.0???

Passatman · Post by **Passatman** » Tue Jul 18, 2006 7:47 pm

Jake it's to remain a 2.0ltr ( 94 x 71 ). Induction is a 44idf carbs, 2.0ltr bus heads stock size valves and a cam change of course.

Passatman · Post by **Passatman** » Wed Jul 19, 2006 9:58 am

Everyone is viewing this and not answering, jake can this be done.

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Wed Jul 19, 2006 10:02 am

140 without some stroke, running on pump gas would be difficult..

The "Super 2 liter" combo made over 150 lb/ft but thats due to the stroke and combo more than anything.

The best way to get torque is to add displacement.

From a stock 2.0 combo, with cam and head work the limit is about 120 Tq.

Passatman · Post by **Passatman** » Wed Jul 19, 2006 1:24 pm

Thank's for the reply jake but is this 120ftibs of torque attainable with stock size valves.

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Wed Jul 19, 2006 1:41 pm

42X36

Passatman · Post by **Passatman** » Wed Jul 19, 2006 3:59 pm