brake problem

Notches, fastbacks, squarebacks.
Post Reply
User avatar
racecar67
Posts: 47
Joined: Mon Sep 26, 2005 5:44 pm

brake problem

Post by racecar67 »

i recently had to replace my master cylinder on my 65 notch due to failure. Replaced it with an aftermarket type 2 . I have rerouted my lines to accomidate the port on top. Went to bleed them with my mityvac and I am getting nothing, the resevoir is not even lowering :?: :?: :?
Top
Post Reply

Return to “The Type 3 Forum”