Page 8 of 13
Posted: Mon Apr 07, 2008 4:06 pm
by tikotiko
let me know whats up with the 3x3's when you get the new ones
Posted: Mon Apr 07, 2008 8:05 pm
by vw505
this add is a freind of mine that makes arms, he should have some 3x5's if that will work.
http://www.thesamba.com/vw/classifieds/ ... ?id=251883
Posted: Wed Apr 09, 2008 12:21 pm
by KBWAKESK8
I ordered a set of 6X6 arms from blindchickenraceing that will allow me to cycle 22" . rasing the trans 1" sliding it back 4"
Posted: Thu May 01, 2008 1:03 pm
by KBWAKESK8
my new toy i picked them up last night $100
Posted: Thu May 01, 2008 1:54 pm
by Leatherneck
Nice, good score!
Posted: Wed May 07, 2008 9:41 am
by KBWAKESK8
My rear arms are some where in the ups system. They where shipped last monday and are still in organ
so im still waiting
Posted: Wed May 07, 2008 9:41 pm
by Crash
They are getting re-shipped by fedex tomorrow.
Posted: Thu May 08, 2008 9:18 am
by KBWAKESK8
sweet
Posted: Mon May 19, 2008 9:37 am
by KBWAKESK8
Crash wrote:They are getting re-shipped by fedex tomorrow.
The arms look great.
the insanity continues, i installed one off the rear arm in the car so I can figure out where the trans needs to be. 20" travel is allot. At full bump it looks like it wants to put the back tires threw the side windo.
Sorry about the quality of the pic's i took them with my phone i will try to take more to night.
Posted: Tue May 20, 2008 9:43 am
by KBWAKESK8
Last night I helped the guy i bought my motor from put his new motor in. He is giving me the fuel pump and regulator for my motor. I also picked up stiffer springs for my coil overs.
Posted: Tue May 27, 2008 11:21 am
by KBWAKESK8
slide the trans back 5" hope to have the car rolling again this week.
Posted: Tue May 27, 2008 1:41 pm
by Leatherneck
Man that is a wide butt ya got. Cheese and rice that is going to be nice.
help rear disk brakes
Posted: Wed May 28, 2008 1:53 pm
by KBWAKESK8
I have a problem I started puting to gether the stub axels. for my disc brakes im running the bolt on calaper bracket. But the 4 bolts tighten up the bearing cap but do not tighten up the calaper bracket. very convused. has any one had this problem.
it seems its always the small stuff that slows me down
Posted: Wed May 28, 2008 1:57 pm
by ChadRat
is your caliper bracket hitting your trailing arm?
Posted: Wed May 28, 2008 2:34 pm
by KBWAKESK8
ChadRat wrote:is your caliper bracket hitting your trailing arm?
no I had to notch it so it wouldn't. I tighten up all 4 bolts and there is still about an 1/8" of play in the calaper bracket.
