Shoptalkforums.com

Piledriver wrote:With the right lasercut bits and a few tabs for alignment the steel setup could become a kit anyone could weld up...

We have a plasma cnc table. That’s how I cut everything out. Was thinking about selling a knock down kit. See how everything goes, time will tell.


Sent from my iPhone using Tapatalk

i'm in for two.
You could probably do knock down t1 and t4 gen stands for it as well, as they also are apparently unobtanium these days as well.

I'm gonna hafta build one of those plasma tables RSN...
Godzilla (TD Pak 100XL) doesnt get used enough.
Do need to carve out some Lexus ls430 caliper mounts for my vanagon this weekend.

Fully welded and mocked on car. Have a few changes to make but nothing crazy. That’s all for now.


Sent from my iPhone using Tapatalk

You do have the ducting vanes in place, right?

Great photo.

Lo cash lester wrote: ↑Tue Mar 23, 2021 5:34 pm


Fully welded and mocked on car. Have a few changes to make but nothing crazy. That’s all for now.


Sent from my iPhone using Tapatalk

Those sure do look good. I always think of the Porsche 356 with dual carbs every time I see one mounted in an engine bay.

H2OSB

FJCamper wrote:You do have the ducting vanes in place, right?

Great photo.

This is what I have. We’ll see what happens.


Sent from my iPhone using Tapatalk

Good luck testing. I'm impressed.

Crazy sh..
How did it work out?

Related-ish:
Saw someone selling lightweight molded plastic fans for T1s at some other site. Look nice, straight radial fans.
Considering getting one to finish my Corvair-ish setup as they are non directional.

Cant find link at moment... ah, it was seen at that face-thing site where good threads all go to die...
https://www.andrigsaircooledtechnology. ... ooling-fan

My friend contacted them about the plastic fan assy , the company is developing a new one with metal hub to make it stronger .

dragvw2180 wrote: ↑Thu Oct 07, 2021 9:56 am My friend contacted them about the plastic fan assy , the company is developing a new one with metal hub to make it stronger .

Good idea.

They should make one for Corvairs, could be same one with the vw one cut down a little and different hubs.
Any Corvair with a mag fan needs a new one yesterday, the fins all crack at the roots eventually.

Lo cash lester wrote: ↑Thu Mar 25, 2021 4:51 pm

FJCamper wrote:You do have the ducting vanes in place, right?

Great photo.

This is what I have. We’ll see what happens.


Sent from my iPhone using Tapatalk

Any update on this?

`Ya know, with those straight bladed lightweight fans being non-directional, you could actually use a pair in a look and work-alike og style twincam fan housing.
(if you had unlimited time and money, of course)

Chip Birks wrote: ↑Sun Oct 10, 2021 11:26 pm

Lo cash lester wrote: ↑Thu Mar 25, 2021 4:51 pm

FJCamper wrote:You do have the ducting vanes in place, right?

Great photo.

This is what I have. We’ll see what happens.


Sent from my iPhone using Tapatalk

Any update on this?

Car is still under construction