That's great to hear Bill! I'm saving up my crombs to get a setup for the Ghia. She shall have a little hot arse for sure! lol
The 1910 would go in the super after that.
Make sure to shield the filter, but not isolate it from air.
E
Fired UP
-
dstar
- Posts: 3733
- Joined: Tue Feb 25, 2003 12:01 am
Bill,
You can roll a piece of flat, rectangular tin into a cyl and punch
three holes in it to match the mount. It would take about 15 minutes
and save your $$$ engine.
Bolt the filter mount THROUGH it to the fender an VOILA! The tin will wrap around the whole mount and filter and keep road debris(ROCKS in OUR area.....)from doing any damage.
Enjoy! I know you already ARE!
Don
You can roll a piece of flat, rectangular tin into a cyl and punch
three holes in it to match the mount. It would take about 15 minutes
and save your $$$ engine.
Bolt the filter mount THROUGH it to the fender an VOILA! The tin will wrap around the whole mount and filter and keep road debris(ROCKS in OUR area.....)from doing any damage.
Enjoy! I know you already ARE!
Don
