2.0 Rods

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Fri Dec 03, 2004 6:36 pm

I need money!

I plan on organizing something as soon as I'm moved into my new office..

type11969 · Post by **type11969** » Fri Dec 03, 2004 6:47 pm

Jake-

Don't belittle yourself by saying that you have an office. I work in an office. You have a kickass engine think tank or something like that.

-Chris

raygreenwood · Post by **raygreenwood** » Fri Dec 03, 2004 7:22 pm

But...I'm not interested in 2.0 rods. Also...Jake...were you not also thinking of starter kits for limited displacement small type 4's? I would think that you would still need both strokes...but in a ratio of 3 to 1 ...71 to 66's. Ray

dstar · Post by **dstar** » Fri Dec 10, 2004 9:17 am

How close are you geting to this Jake?

Don

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Fri Dec 10, 2004 10:19 am

About as close as possible!

Not ready to make any commitments till we are 100% ready to go wide open! There is nothing worse than 10,000 questions!

BTW, The "Think Tank" is still where it was... The new office is an office- It manages another entirely different aspect of Raby Enterprises Inc.

The old "Think Tank" is 175 feet behind me in the same building......... One area I'm in engine mode, the other I'm in another mode that you all will love! (if you don't my ass will go broke- This has not been cheap, but its all paid for!)

dstar · Post by **dstar** » Fri Dec 10, 2004 12:44 pm

When YOU start SELLIN, I'LL start BUYING!

BUWAHAHAHAHAHAHAHAHAHA!

Don

raygreenwood · Post by **raygreenwood** » Fri Dec 10, 2004 12:58 pm

I have a think tank too! Sometimes I forget to flush it when too much thinking goes on

Ray

Tom in PA · Post by **Tom in PA** » Fri Dec 10, 2004 9:53 pm

actually Jake, I have a feeling that when you are in your "other mode" we'll be the ones going broke. I have a feeling you'll have plenty of us opening our wallets as soon as you open the new division. Can't wait to see what's in store for the future

Tom in PA

Dominic · Post by **Dominic** » Mon Jan 17, 2005 2:51 pm

BUMP...Just wanted to keep this thread alive. I'm ready to start buying as soon as Jake gives us the word that he is having them made.

I hope we have pleny of other T-4 nuts out there that will help make this dream of new 2.0L rods become a reality.

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Mon Jan 17, 2005 6:19 pm

It is gonna take more buyers than what I have lined up so far...

I have to buy 500 Rods guys... All exactly the same!

This is not a small purchase!

jonas_linder · Post by **jonas_linder** » Tue Jan 18, 2005 3:29 am

I'm up for one set ... 2 of my friends are to.. I belive.. if you get a list up and going maybe with paypal(?) I'll make a payment right away!

type11969 · Post by **type11969** » Tue Jan 18, 2005 4:47 am

I'm up for a set jake!

-Chris

Mark the canuck · Post by **Mark the canuck** » Tue Jan 18, 2005 5:53 am

Over on the 914club site Walter asked a very good question!

Hi Jake,

Is it a 24mm (stock) or 22mm piston pin?
(strange nobody asked before)

Thanks,
Walter

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Tue Jan 18, 2005 7:26 am

I said they were a stock 2.0 replacement didn't I.... Just stronger and lighter.

Guest · Post by **Guest** » Tue Jan 18, 2005 7:39 am

I cna buy a set also.

Let us know when you need the $$$.

Don

Shoptalkforums.com

2.0 Rods

RE: NEW 2.0L RODS !