Re: Mexican 1600i fuel pump
Posted: Tue Sep 22, 2026 11:00 am
Ideal location is in-tank, but those screw pumps can run either way. Main issue is like a Bosch 044 or such, wants a ~13-14mm id feed line.
Fuel tank location, hose clamped to the fuel sender bracket deals with that well, but then you are doing mods to the sender top at a minimum.
The screw pump is ~1/2 the diameter of an 044, or thereabouts, which makes more setups possible.
Fuel tank location, hose clamped to the fuel sender bracket deals with that well, but then you are doing mods to the sender top at a minimum.
The screw pump is ~1/2 the diameter of an 044, or thereabouts, which makes more setups possible.