Page 5 of 11
Re: my lifted bus build
Posted: Fri Jul 09, 2010 10:13 pm
by fusername
Well today AJ came by to pick up some parts I traded him for the trans, among other things. He shot some nice video of the buggy driving to prove that unlike sneaks I didn't need a hill to stage my photos. I gave him some lovely bearings, which I then promptly threw on the ground. to retaliate he repacked a CV joint or two for me. We also were standing around wasting time when some very shiny mirrors and grabby tires showed up from summit, and let me tell you, that thing is a gokart now. Ass for th b us Ihave one torsion bar indexed, and the other is about ready to come apart. Its gonna rain all day tommorow but I have a hot date so I will set up an umbrella. Also gonna try and take the buggy out for a spin in the wet to see what the tires are like, sure hope I got what i paid for, using the term "i" loosely.
Re: my lifted bus build
Posted: Sat Jul 10, 2010 4:52 am
by bajaherbie
be sure a post pics of the hot date.
Re: my lifted bus build
Posted: Sat Jul 10, 2010 9:26 am
by Sneaks
bajaherbie wrote:be sure a post pics of the hot date.
You can use the pic for your new avatar...
HILL?
HILL?!?!
See the Petco? You've been to my house. That's the same Petco Mikey works at. Hill my ass. My street is so flat even water doesn't run down it. See, the way I see it, I won cuz I have pictures posted the soonest.
I'll pass on the chicken dinner, just have NLWHS bring some treats and I'm good.
When is she going to sign up, anyway? We need to baja the 'rado.
Re: my lifted bus build
Posted: Sat Jul 10, 2010 11:04 am
by bajaherbie
fusername, i think your bus would make an awesome "jersey looker"-- crager wheels, hacked/fender flared wheel openings, lotsa wood paneling, and a few yards of shag carpeting.....
Re: my lifted bus build
Posted: Sat Jul 10, 2010 11:23 am
by fusername
I would but I am having trouble finding a big enough mirror for the roof.
Re: my lifted bus build
Posted: Sun Jul 11, 2010 2:12 pm
by fusername
ami doin it right?

Re: my lifted bus build
Posted: Sun Jul 11, 2010 2:59 pm
by Sneaks
I have some old 8-tracks for you...
Re: my lifted bus build
Posted: Sun Jul 11, 2010 4:50 pm
by bajaherbie
nice touch with the mustang tail lights....
Re: my lifted bus build
Posted: Sun Jul 11, 2010 4:56 pm
by Sneaks
I like the way you changed up your avatar, Herbie, just don't get into the habit...
Re: my lifted bus build
Posted: Sun Jul 11, 2010 9:08 pm
by fusername
:groan:
Re: my lifted bus build
Posted: Mon Jul 12, 2010 8:30 am
by ajdenette
Here I go again spoiling the pictures
Here is the bus as I showed up
Fusers lift spindles???????
Fusers locker to prove he actually ownes one
Here is a comparisons between boots one bug, some type four and an old well used bus one.

Re: my lifted bus build
Posted: Mon Jul 12, 2010 8:34 am
by fusername
lesson learned, its not the rubber on the empi boots, but the way they are stamped to the steel which causes sharp edges to dig in and cut the boot at extreeme angles, making them a poor \choice for off road apps.
Re: my lifted bus build
Posted: Mon Jul 12, 2010 8:55 am
by ajdenette
Rockfords are the top right, empi is visible on the axle, the bug is botom left, and well used bus is botom right i forget the midle 3.
Re: my lifted bus build
Posted: Sat Jul 17, 2010 8:19 am
by fusername
so AJ totally saw me at my best when he swung by. turns out only one of the empi boots had torn, I musta had a dream about the second one going, cause in reality it was fine. I also forgot how to use a wrench, jack, compresser, and several other things while he was there.
anyways the bus is back on the road, assuming it passess its driving test today. last night as i finished it started to lighting and thunder. gonna spin around the block today then clean her and the garage out. Then its to NH for some stress testing of the trans on sunday.
Re: my lifted bus build
Posted: Tue Jul 20, 2010 9:33 pm
by fusername
oops