TIV store order cut off date- The line is tagged Friday 6/23

This forum is for any discussion related to Aircooled Technology, the DTM shroud and Massive TypeIV engines. You may read and search this forum, but you can not post to it.
MASSIVE TYPE IV
Posts: 20132
Joined: Fri Jul 07, 2000 12:01 am

TIV store order cut off date- The line is tagged Friday 6/23

Post by MASSIVE TYPE IV »

we are super busy here trying to get ready for our trip to lemans. The store will be closed from 28 June to 17 July so no orders will be processed.

If you plan on making an order for good that will be needed during this time IT MUST BE RECEIVED BY FRIDAY 23 JUNE 2006 by close of business.

All orders received after this time will be initiated in our system, but will be PROCESSED upon our return on 17 July. Next week we will be trying our best to ensure EVERY order that has been placed (prior to 6/23) is processed and SHIPPED. Only the most recent engine kit orders and a couple of head orders will remain in work while we are gone.

remember, from 6/28-7/13 NO ONE will be at the shop, the compound will be closed and we'll be enjoying the first break of any duration that we have had in 8 years. If you need support get it now!
Last edited by MASSIVE TYPE IV on Wed Jul 12, 2006 12:19 pm, edited 1 time in total.
User avatar
Piledriver
Moderator
Posts: 22878
Joined: Sat Feb 16, 2002 12:01 am

Post by Piledriver »

Jake, the PRs, springs, keepers/retainers, rocker shaft spacers, pads... and a fresh set of 1700 ex valves are on order as of ~20 minutes ago. (You don't list SS ex valves in the 1700 size :-( )

I now have a sneaky suspicion the "rocker pads" I ordered are the rocker shaft retainer blocks--- I DON'T NEED/WANT more rocker shaft blocks, I need pad shims to properly set geometry with the new PRs...

I forgot to order a new fan end seal... I can get locally I guess.

Hoping to get this stuff so I can slam the 1800 jugs in over the 4th. (turned down OD KS 93s in the 1700 heads)

Congrats to you and Beth, and have a ball in France!
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
MASSIVE TYPE IV
Posts: 20132
Joined: Fri Jul 07, 2000 12:01 am

Post by MASSIVE TYPE IV »

I saw the order..
I believe that we have all of it in stock other than the rocker pad shims.. We just used the last set in an engine kit and don't expect more until we get back.
User avatar
Piledriver
Moderator
Posts: 22878
Joined: Sat Feb 16, 2002 12:01 am

Post by Piledriver »

Thanks, Jake.

I'll try to track down some pad shims.

I'll be looking for the order!
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
MASSIVE TYPE IV
Posts: 20132
Joined: Fri Jul 07, 2000 12:01 am

Post by MASSIVE TYPE IV »

The order line has now been tagged... All orders placed after 1800 today will go out when we return on July 17!
User avatar
bj
Posts: 1162
Joined: Sat Feb 08, 2003 12:01 am

Post by bj »

please please please tell me that you got my order on 22AUG?

it was late so your time may have been early AM 23th.

thanks.

bj
MASSIVE TYPE IV
Posts: 20132
Joined: Fri Jul 07, 2000 12:01 am

Post by MASSIVE TYPE IV »

Email Rebecca [email protected] as I don't fill orders in the store, I'm only the Tech guy...

If we got it before the cut off time and it was in stock it either has or will ship before we leave. We were slammmed last week with a bunch of big orders and they are still working to get those orders processed..
Locked