Page 1 of 1
trekker data
Posted: Thu May 13, 2010 11:05 am
by flamingfishtails
hi, has anybody got any data i could work to, i have cut my trekker in half to replace rockers and lots of other repairs, now its time to stick it all back together and need some info as to
where to weld before you ask i took some measurements before cutting but as it has had a hard life none of the measurements matched from side to side. any help would be usful thanks
Re: trekker data
Posted: Thu May 13, 2010 11:15 am
by doc
What's a trekker?
doc
Re: trekker data
Posted: Thu May 13, 2010 1:21 pm
by flamingfishtails
hi, a trekker is the uk name for a thing....181 etc
Re: trekker data
Posted: Wed May 19, 2010 5:54 pm
by Kubelmann
The Trekker is a 182 not 181 It has this designation because they are left hand drive unlike a 181 which is right hand drive.
Re: trekker data
Posted: Thu May 20, 2010 7:41 pm
by sixty9fasty
Kubelmann wrote:The Trekker is a 182 not 181 It has this designation because they are left hand drive unlike a 181 which is right hand drive.
WhiskeyTangoFoxtrot. You got it the wrong way around...
Re: trekker data
Posted: Fri May 21, 2010 9:56 pm
by Kubelmann
That is funny. You are correct. 181 = Thing = left hand drive 182 = Trekker = right hand drive. Late night reversal error.
Re: trekker data
Posted: Sun May 23, 2010 12:41 pm
by sixty9fasty
Kubelmann wrote:That is funny. You are correct. 181 = Thing = left hand drive 182 = Trekker = right hand drive. Late night reversal error.
I've been there..... many a time