goodbye acvw world im going watercooled

[nunit]

im done with the aircooled motor so here are the parts i have left from my last motor
welded balanced fan from type 4 store-40 plus shipping
ac. net svda distributor with brand new pertronix kit(used for 20 minutes) 100 plus shipping
scat aluminum degree pulley with stock vw nut 15.00 shipped
12.5 chromoly flywheel( needs to be turned) 50 shipping
empi 44 hpmx carbs two sets of vents(34 and 30) mains (135 150) and idles (55 60) has cb manifolds and air cleaners no linkage 200 plus shipping
041 heads vut for 90.5 40x 35 valves dual springs 1.25 rockers solid shaft vented stock valve covers mild oval port and clean up 51 cc chambers 200 plus shipping
also have four type 4 cylinders bored to 95mm or so 50 shipped
i accept paypal and cash
my zip is 36323 for shipping quotes etc

i really want this gone so if you think im too high pm me i already have my ej22 so i want this crap outta here

thanks again

[nunit]

oh almost forgot i have a new bugpack 1 5/8 header thick flanges has a 3 inch chevy flang on it pushed nack about two inches will include other flang for you to do your exhaust 100 dollars plus shipping+i removed the paint it came in and repainted it with vht flat black used for twenty minutes

[david58]

PM sent on carbs

[Piledriver]

PM sent on cylinders.

[nunit]

cylinders sold to pile
heads and carbs pending stray catalyst
on the svda il lalso include a used for 20 minutes msd 6al and msd blaster two coil for a package deal of 320(dizzy with pertronix msd 6a and coil) no wires sorry or for the msd 6a and coil ill take 225 plus shipping i still have the box with all the pills and bits etc instructions

[Stray Catalyst]

PM sent - I and my eternal project thank you.

Stray

[nunit]

bump lets get the rest out

[nunit]

heads and carbs sold

[nunit]

come on nobody needs a header a dizzy with msd setup a degree pulley or welded fan?

[Clonebug]

pic of the pulley please.... and is it dust sealed or stock???

If stock I might be interested.... ah heck with it if it is in decent shape I'll take it.

Pm an address so I can get you some dough All I have is Credit Card on paypal.

I can send you a usps mo if you want.

Edit
This pulley is for a type one engine or a type 4???

If type one and stock diameter I'll take it.


Clonebug

[nunit]

bump

[nunit]

pulley sold to clonebug

[nunit]

msd box and coil sold locally

[nunit]

dizzy pending

[nunit]

all thats left is the header the fan and the exhaust