Page 1 of 1
New IDF pattern Induction
Posted: Sat Apr 13, 2013 7:51 am
by Paul H
Got a few of these injector bodies and pressure chambers ready to go
Basically IDF throttle bodies without the throttles.
48mm bores
Polished ally cans with end cap (not welded)
O ring sealed spigots and clamps.
14mm injector bore with 6mm bolt holes nearby
No fuel rails available at the moment
Use with centre mount single throttle or whatever
£160 inc vat
or
$205
Re: New IDF pattern Induction
Posted: Sun Apr 21, 2013 10:28 pm
by MarioVelotta
Hey Paul, nice as always. Do you plan on offering these with throttles at some point?
Re: New IDF pattern Induction
Posted: Sun Apr 21, 2013 11:29 pm
by Piledriver
MarioVelotta wrote:Hey Paul, nice as always. Do you plan on offering these with throttles at some point?
...Possibly in <48mm size?
Re: New IDF pattern Induction
Posted: Mon Apr 22, 2013 1:49 am
by Paul H
Yes they will be available as throttle bodies very soon
38mm through to 54mm
The smaller sizes have a venturi shape so they will blend nicely to the generic 48mm manifolds.
Injector ports are moved inwards to get a straighter shot down to the port on a type 1
They are also shorter than IDF's giving more room for induction devices and hood clearance on V8's