Shoptalkforums.com

i was wondering what you guys suggest for a cylinder head temperature setup.
I was looking at this: http://www.atvrideronline.com/newsfront ... to_07.html
If I posted this in thw wrong place, Mods, please move it to wherever it is better suited.

I use the sensor connection thermocouples and digital gauges.

I don't always run my computer though....

Won't need it

Oh. Cool!
Where do I get one?

Thesensorconnection.com

Thanks!

No problem sir!

dakota digital also makes em. The only real pointer I can give you (I made my own lol) is make sure it is temperature compensated. Most guages only read relative temp with thermocouples, meaning your engine temp reading you need to add or subtract the difference between 70 deg and the current temp of your guage dial... kinda annoying.

Devastator wrote:i was wondering what you guys suggest for a cylinder head temperature setup.
I was looking at this: http://www.atvrideronline.com/newsfront ... to_07.html
If I posted this in thw wrong place, Mods, please move it to wherever it is better suited.

cable seems pretty short? price is good though!

I got my sensor connection thermocouple ring from Mario. I run a dakota digital dash gauge. I run a second TC that I can view in my ECU/data log.

Got the same gauge from Auberins.com. Had to get ten bucks worth of tc wire and extend the cable though. But, that was cool cause to get the engine out you really need a connector on the tc anyway. I was having to remove it from #3 and i had it under the tin. Sucked.