Ford Flex Fuel Sensor Fittings?

Fuel Supply & Ignition Systems
Post Reply
User avatar
risk
Posts: 335
Joined: Mon Nov 19, 2007 2:43 pm

Ford Flex Fuel Sensor Fittings?

Post by risk »

Trying to find the correct fittings for a Ford fuel composition sensor. The threads are M12x1.50 and it has a flat face style o ring. I need to adapt it to AN6. I ordered some AN6 to M12 adapters with o orings which may work... but the o rings aren't recessed like the Ford fitting.
20150306_104252.jpg
Here is a fitting similar to the ones I ordered:

Image
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Dale M.
Posts: 1673
Joined: Mon Oct 05, 2009 8:09 am

Re: Ford Flex Fuel Sensor Fittings?

Post by Dale M. »

Technically its not a "flat style O ring".... Its a flat gasket....

Might try a "flat" sealing washer/gasket....

https://www.belmetric.com/drain-plugs-a ... -c-11.html

https://www.pegasusautoracing.com/group ... D=PLUMSEAL

http://www.summitracing.com/search?Sort ... %20washers

What comes to mind is the "fiber gaskets" or "nylon sealing washer"....

Dale
"Fear The Government That Wants To Take Your Guns" - Thomas Jefferson
1970 "Kellison Sand Piper Roadster"
Top
Post Reply

Return to “Engine Management”