UPDATE :They took care of it (Need help with ecotec E67 2.2 dead pedal - Alpha Fab won't help...)
Posted: Wed Nov 21, 2018 5:54 am
Bought system from Alpha Fab, talked & emailed with Shaun was "sending" a new computer. Never showed up, now won't respond. This has been going on 4 months...
Long story short I get a dead throttle pedal upon acceleration under load.
I have a coil on plug 2.2, E67 ECM with DBW pedal
VIN is from '07 Saturn ION that ran the E67
Codes that are always there are P0102, P0650 & I get P0606 when the pedal goes dead. Take battery cable off it will reset, but just happens again
I have a copy of the tune from EFI Live
I've been told the ECM could be bad, tune could be shot, etc. Anyone able to help?
Long story short I get a dead throttle pedal upon acceleration under load.
I have a coil on plug 2.2, E67 ECM with DBW pedal
VIN is from '07 Saturn ION that ran the E67
Codes that are always there are P0102, P0650 & I get P0606 when the pedal goes dead. Take battery cable off it will reset, but just happens again
I have a copy of the tune from EFI Live
I've been told the ECM could be bad, tune could be shot, etc. Anyone able to help?
