Page 1 of 1
105mm Je pistons with cast cylinders for a daily driver
Posted: Sun Mar 15, 2020 8:49 am
by pnikas
Hello everybody , would you recommend 105mm JE pistons with cast iron cylinders(csp) set , with a 71mm crank for a daily driver? Will it be reliable ?
Re: 105mm Je pistons with cast cylinders for a daily driver
Posted: Sun Mar 15, 2020 1:32 pm
by cal 67
You should use six studs to minimize deflection if using a stock casting. There may be other ways to seal, but six-studding is probably he most reliable way.