Page 1 of 1
spindle, hub, and calliper drawings needed
Posted: Wed Sep 02, 2020 11:29 pm
by hoghead
Looks like I am going to have to make my own 5 x 130 aluminium hubs to fit my rotors and callipers
Does anyone have a drawing for:
Type 1 disc brake spindle
Stock(ish) hub
996 front callipers
Re: spindle, hub, and calliper drawings needed
Posted: Thu Sep 03, 2020 9:30 am
by Bruce.m
This might be helpful for the hub info?
Re: spindle, hub, and calliper drawings needed
Posted: Thu Sep 03, 2020 7:28 pm
by hoghead
Thanks and I found this Brembo site yesterday with all specs including the 996 front rotors.
https://www.brembostoreusa.com/product/ ... r-brembo-n
https://www.bremboparts.com/europe/en
Also found a Brembo Big Red and spindle stub drawing I did so far back I forgot!
Now I just need the relationship between spindle and upright at the calliper bracket
Re: spindle, hub, and calliper drawings needed
Posted: Thu Sep 03, 2020 7:39 pm
by hoghead
This might work and reasonable at 190.00 USD ea
Would have to throw away the rotor as they will not sell just the hub.
https://www.cbperformance.com/product-p/4182.htm
