Page 1 of 1
Beetle upgrade to FI
Posted: Sat Jun 28, 2025 8:48 am
by Meresider
73 bug non 1303.
Need to upgrade to 8mm, existing is easy but where do I add return line in newish tank, best way to add without causing swarf and ignition of vapour.
Will be using hose as final connect from copper lines.
Thanks
Sent from my SM-S711B using Tapatalk
Re: Beetle upgrade to FI
Posted: Sat Jun 28, 2025 10:13 am
by Bruce.m
Cb performance Tee piece fitting for under the tank. Or use a mexican beetle 1600i pump & swirl tank (chunky the find space for it however)
Re: Beetle upgrade to FI
Posted: Sat Jun 28, 2025 1:40 pm
by Meresider
Bruce.m wrote:Cb performance Tee piece fitting for under the tank. Or use a mexican beetle 1600i pump & swirl tank (chunky the find space for it however)
Cheers,
6483 Billet Fuel Tank Outlet Tee
https://www.cbperformance.com/product-p ... OxbJegvYnc
Just need a UK supplier
Sent from my SM-S711B using Tapatalk
Re: Beetle upgrade to FI
Posted: Sun Jun 29, 2025 1:58 am
by Bruce.m
Add a few bits & bobs (keep it below £135 equivalent), then order direct. Shipping will be circa $50 but if the price of parts is under £135 (be conservative with the conversion rate) you don’t pay vat or duty. Above £135 you pay both on the total cost including the shipping.
Re: Beetle upgrade to FI
Posted: Sun Jun 29, 2025 2:02 am
by Bruce.m
If you are going EFI the CB “camsync” is great value. Combined with a crank trigger (VW speedshop make a great kit), you can have full sequential set up.