Page 1 of 1
Boost
Posted: Sat Apr 19, 2003 4:21 pm
by tomkisner
I was just curious I plan on running a pull through application on a 2110cc Type one with a modified 40 DCOE Weber. Per RPM is there a way to estimate the amount of boost I would be running? I Don't want to wind this motor out so i wanna keep relatively low RPM with a 6500-7000, but I wanna have boost down low. Where can I get Carbon Seals for the pull through application? Thanx Alot Tom
Posted: Sat Apr 19, 2003 5:52 pm
by tomkisner
Its a T3 turbo by the way
Posted: Sun Apr 20, 2003 9:45 am
by purple69
there are too many factors involved to be able to give you an estimate. heads, cam, and exhaust size are 3 of the main factors that will decide when your turbo will spool up. unless you give us more info i don't think anyone can be of much help to you
Posted: Sun Apr 20, 2003 11:33 am
by Guest
Sorry iu didn't put it stock cnc 044 w/42x37.5 valve 1 1/2 inchg exhaust and web cam 00-382 cam