ShopTalk Forums | Aircooled VW Tech & Restoration Help

Posted: **Thu Feb 17, 2005 4:08 pm**

I have an engle 110 cam and I don't know how to mate the pieces properly. Could any one help?

Posted: **Thu Feb 17, 2005 6:13 pm**

Aline the notch ( for the oil pump drive) on the cam with the bolt hole (on the gear) that has the timing mark inline with it. You sould have a straight line...notch, bolt hole, timing mark.

Posted: **Fri Feb 18, 2005 5:09 pm**

thanks john w. kelly

ShopTalk Forums | Aircooled VW Tech & Restoration Help

cam gear alignment

cam gear alignment

cam gear alignment