Is it better to provide my own engine case for your kit?

This forum is for any discussion related to Aircooled Technology, the DTM shroud and Massive TypeIV engines. You may read and search this forum, but you can not post to it.
randyj
Posts: 86
Joined: Sat Jan 26, 2002 12:01 am

Is it better to provide my own engine case for your kit?

Post by randyj »

Jake,

I have been looking at getting one of your engine kits for a while. Is it better to provide my own engine case or buy one from you? I do not currently have one but there are ones on Ebay and such every now and then.

Thanks,
Randy
MASSIVE TYPE IV
Posts: 20132
Joined: Fri Jul 07, 2000 12:01 am

Post by MASSIVE TYPE IV »

Randy,
All the kits are set up for you to provide a complete core longblock that you will disassemble. There are quite a few things that will be needed to complete the engine more than just the case it's self.

These items are things like the oil drain plug, sump plate, case specific hardware, head studs and etc.

The best thing to d is source a TIV longblock of any year and with the aid of the video included with the kit disassemble it and then build it back up with the new parts from my kit.
User avatar
bogaat
Posts: 179
Joined: Fri Jun 01, 2001 12:01 am

Post by bogaat »

Jake, I am planning on buying a kit before too long and was planning on getting the case from you. Any chance you might be able to provide the "missing" pieces when ordering a case to make the process a "one stop shop"?
User avatar
dstar
Posts: 3733
Joined: Tue Feb 25, 2003 12:01 am

Post by dstar »

You can get a complete(sometimes RUNNING) engine at a U-Pull-It type place for $50-$75.
:D

There are MANY little pieces that you will need that are a PAIN to source individually and are Type 4 SPECIFIC. Type I parts, need not apply....
:wink:

There also engines on Ebay for as little as $50 + about $100 shipping(if necessary).

Don
MASSIVE TYPE IV
Posts: 20132
Joined: Fri Jul 07, 2000 12:01 am

Post by MASSIVE TYPE IV »

I can supply the extra parts, but they are not catalogged, and I have to charge more for them than most core places would.

I would still recommend fining a core engine and tearing it down for more reasons than one.
User avatar
bogaat
Posts: 179
Joined: Fri Jun 01, 2001 12:01 am

Post by bogaat »

Just trying to save some time. I have a new baby and my dedicated VW time is less than it used to be! If my child was a little older, I could get her to tear the engine down for me. That is experience every child should have :wink:
User avatar
dstar
Posts: 3733
Joined: Tue Feb 25, 2003 12:01 am

Post by dstar »

You have a shop?

I could come down one Saturday and help ya tear one apart!
Might could even bring you a core, if you really needed it.

Don
User avatar
bogaat
Posts: 179
Joined: Fri Jun 01, 2001 12:01 am

Post by bogaat »

That is one reason I haven't ordered a kit yet. My current "shop" is my one car garage. Very soon, I will be moving to a new house and I will have a real shop area again (should have an attached garage for our primary vehicles and a detached shop for my weekend ventures). I am holding off on my next resto until the move. You going up to Rockingham this weekend, Don? That is a very generous offer by the way. I grew up in Columbia and my family still lives there. We might just have to meet up at some point (even though your avatar scares the hell out of me for some reason :lol: ).
MASSIVE TYPE IV
Posts: 20132
Joined: Fri Jul 07, 2000 12:01 am

Post by MASSIVE TYPE IV »

Kit prices are going up across the board in two weeks. I am absorbing a lot of cost (extra time) to package the stuff correctly and some parts are going up a tad bit due to the fuel issues.

expect a 5% increase across the board on all kits.
User avatar
dstar
Posts: 3733
Joined: Tue Feb 25, 2003 12:01 am

Post by dstar »

bogaat wrote:That is one reason I haven't ordered a kit yet. My current "shop" is my one car garage. Very soon, I will be moving to a new house and I will have a real shop area again (should have an attached garage for our primary vehicles and a detached shop for my weekend ventures). I am holding off on my next resto until the move. You going up to Rockingham this weekend, Don? That is a very generous offer by the way. I grew up in Columbia and my family still lives there. We might just have to meet up at some point (even though your avatar scares the hell out of me for some reason :lol: ).
Well, I live in a condo, and rebuilt the 2.0L in my bus, the 351W in my Econoline, and just last week, removed the gas tank(just filled!) and replaced the fuel pump, all in the parking lot!
:twisted:

We could tear it down on your kitchen table, if need be!
;-)

Yes, I will be at the Rock Sunday. :D

Why would it scare ya, I don't even LIKE deer huntin!
:shock:

Heh, Heh, Heh! Don't let the avatar scare ya, it looks JUST LIKE ME!
Long red-haired, fat guy......that's always laughing!

BUWAHAHAHAHAHAHAHAHA!

I know where a longblock is if you need me to pick it up 4 ya,
let me know.

I go to C-Town at least once a month to get decent seafood and do
some pier-fishin, I could drop it off to ya then.

Don
User avatar
raygreenwood
Posts: 11914
Joined: Wed Jan 22, 2003 12:01 am

Post by raygreenwood »

Seafood huh?......used to occasionally eat at various places in "Merles inlet"...right off Hwy 17...not far from charlston. Some good ...some so so. :D Ray
User avatar
Cohibra45
Posts: 295
Joined: Sun Jan 30, 2005 7:50 pm

Post by Cohibra45 »

Merles Inlet, right below old Myrtle and above C-town. Family use to vacation every summer in 'Cresent Beach next one down from Ocean Drive' in the 50's and 60's. Now they call it North Myrtle.

Now I live in Melbourne, Fl. D-Star, could you drive down and help me with my TIV. I need to get a longblock and do the teardown thing. Watching the 'Bug Me Videos' makes me want to get my hands dirty and I need the experience and engine parts for my kit that I want to buy from Jake.

BTW, seafood down here, when I go out with my buddy; fresh if you know what I mean :D .

Kelly
Kelly (Cohibra45)

When only the BEST will do............

http://www.aircooledtechnology.com/
User avatar
dstar
Posts: 3733
Joined: Tue Feb 25, 2003 12:01 am

Post by dstar »

Cohibra45 wrote:
BTW, seafood down here, when I go out with my buddy; fresh if you know what I mean :D .

Kelly
Fresh, yea, I know wut ya mean!

Whilst in the Navy, stationed at Great Mistakes, I went *out* with a
shipmate for a nearly month long *fishing adventure* on one of his Dad's boats.

Made good $$$$, but didn't want to even SEE any seafood for a long time!
:wink:

Melberne is about a 7 hrs drive fer me..............C-Town is an hour.

Just take Jake's video and turn it on and follow it closely, rewinding and
pausing as needed!

I watched it 7 times! Just about memorized it!

Don
User avatar
bogaat
Posts: 179
Joined: Fri Jun 01, 2001 12:01 am

Post by bogaat »

I'll keep any eye out for you Sunday, Don. I will more than likely be hanging around the swap area selling some parts and looking for new ones. The bug will not be attending this year, but maybe next. Are you gonna have a car in the show/race? If your hanging around bored (or not) at the show you can call me (843-670-6454) and we can meet up and chat for a bit. I am really looking forward to some good bbq up there :D
User avatar
dstar
Posts: 3733
Joined: Tue Feb 25, 2003 12:01 am

Post by dstar »

Yea, gotta go to NC fer good BBQ!
I HATE this yellow, baby-poop lookin stuff!
:lol:

I'll have my GF and daughter with me, so I'll be doing good to be able
to get to go over the swap meet and watch a little drag racin before
they are whining to go home.....
:(
You don't happen to have any Kadron center pull linkage setup fer a
Type I do ya?

Red hair, red beard, glasses, short fat, dumpy, ALWAYS smilin!
You'll notice me, I look exactly like this guy:

http://www.shoptalkforums.com/profile.p ... ofile&u=16

Hmmm, Fer so reason, I can't seem to be able to view his avatar right now....


Don
Locked