This forum is for any discussion related to Aircooled Technology, the DTM shroud and Massive TypeIV engines. You may read and search this forum, but you can not post to it.
Okay guys..
We are constantly trying to make lifters better and we have yet again done this..
The lifters we have had in the store to date have been working great. We have had two failures out of about 120 sales, so thats not too bad and I feel its acceptable these days.
I have been playing with some new lighter weight lifters and each and every person who has bought cams/lifters from us will be getting a set of these in the mail with a note in the next few days. If you have already assembled your engine and its already been fired up, simply slap the return label on them and mail them back.
If your engine is assembled, but not yet been fired up then swap these lifters with your originals and send the originals back to us so we can complete the newest processes to them to further enhance them so we can get them back in stockand ready for re-distribution. The return label and postage will be included with the replacement lifters as well as a return envelope.
These new lifters are FORTY GRAMS LIGHTER than the originals and are a direct replacement in every other regard.
I want to stress that the lifters we have been selling are fine and are performing as tested/expected, but these newest lifters are even better, even harder and even lighter. These days a lifter can never be good enough and I want to provide the best I can all the time.
The new lifters are 65.00 more per set but all our previous customers won't be getting charged a dime for them- Merry Christmas... Just send your originals back to us!
Expect these late next week in your mailbox!!!! Call me/ email me with questions if you have any.
Last edited by MASSIVE TYPE IV on Mon Sep 19, 2005 8:57 am, edited 1 time in total.
The lifters we have been selling since February were based from an OEM lifter. They weigh 140 grams. The newer lifters are a 2 piece design and that allows the inside of the lifter to be further modified, reducing weight.
