Shoptalkforums.com

Posted: **Mon Sep 20, 2004 5:54 pm**

You'll need it on that route. Last time I drove to the Classic from Colorado... we hit temperatures as high as 112 in Nevada.

Posted: **Mon Sep 20, 2004 6:17 pm**

should be a great test for the heads for sure!

Posted: **Mon Sep 27, 2004 7:05 am**

Jake, why did you choose a 1.7 case?Is there any advantage over the others?Or are they all the same just different bores?
Good luck on your trip it sounds like it´s going to be a blast! Maybe install a 5 speed porsche tranny before you go - that engine would be perfect for it!

Posted: **Mon Sep 27, 2004 12:42 pm**

Two reasons...

Thecase was very low mileage and I wanted to prove that the 1.7 is just as strong as any of the others.

Posted: **Tue Sep 28, 2004 8:17 am**

What are the differences between the 1.7 case and the others besides the bore? It´s probably a retard question but the only case I´m familiar with is the 2L case.

Posted: **Tue Sep 28, 2004 8:44 am**

No differences in the case at all from 1.7-2.0 measurement wise no real differences at all.

Posted: **Wed Sep 29, 2004 6:20 am**

Thanks Jake that´s what i wanted to know.

Posted: **Fri Oct 15, 2004 9:43 am**

i would be up for the cruise if you came through salt lake city at all or i could join up with you somewhere south if needs be. i still have my 2.5L TIV in my notch and i should have new home built aluminum front end for it on by then. i had my head temps around 280 degrees whether in the city or cruising at 90mph on the freeway. i missed the classis this year because the notch hit some trouble and shattered the fiberglass front end i had on there. im excited even if its a ways off in the future. sounds like a plan.

SAM

Posted: **Sat Oct 16, 2004 6:00 am**

Jake - Cleveland to Bentonville, AR is about 850 miles. I'm about 50-60 miles north of US40. Would be happy to put you up for the night and have reasonably complete shop facility to address minor repairs. Let me know if we can be of service. Plenty of room at the house.

doc

Posted: **Sat Oct 16, 2004 7:39 am**

cool, Doc....

That sounds like a good stop for the first day of driving...

Of course, we won't be needing to make any repairs, but somewhere to stop and check the valves would be cool.. This is a total product development venture since in 2250 miles most problems will show up, or atleast make themselves apparent.

Posted: **Sat Oct 16, 2004 8:59 am**

Jake - I think you have my contact info. Call when you get closer to trip to make arrangements or pm me at your convenience. The invite is open.

doc

Posted: **Sat Oct 16, 2004 3:09 pm**

Jake,

Why don't you swing down south to say AUSTIN, TX going there and then go back the shorter route?

Randy

Posted: **Sun Oct 17, 2004 12:37 pm**

Hey Jake,

The girls are alot better looking in Austin. Just might be a better spot to rest a day on the way home and shop...

Randy

Posted: **Sun Oct 17, 2004 3:34 pm**

I've been to Austin. The girls are better looking.

Posted: **Sun Oct 17, 2004 3:52 pm**

That they are but if he would come out of them mountains and down to the big city they are close if not equal here in Atlanta.

Bert

Shoptalkforums.com

The "Power tour" cross country cruise with a 3.0!