Shoptalkforums.com

Latest product
IDF Throttle bodies

Sizes 38mm thru 54mm
Sealed roller shaft bearings with centre shaft support bush
Single center idle air adjusters can be top or side mounted
Vacuum balance channel and 1/4 npt outlet port
O ring sealed base
Stainless hardware
Profiled stainless throttle shafts
Long or short injectors
Various filter rams and turbo feeder available
Die cast heat treated body
38 thru 45 have dual tapered tract to match up to 48mm manifolds and intake pipes.
Bla Bla Bla

vwspeedshop.com wrote:Price per pair

Any chance of these becoming available as a single?

foreverska wrote:

vwspeedshop.com wrote:Price per pair

Any chance of these becoming available as a single?

Yes no problem would have to be a right hand one if you want TPS

AND the price is?

Basic 38mm thru 45mm are £350 ex tax which is about $520
That includes fuel rails,tps,and the ram pipes which accept 2 inch neck cone filters or turbo pipe.
The 48mm thru 54mm are a bit more because they have the larger radiused ram pipes to accept the 2 5/8 inch
neck filters- air filters are available from Bugpack.

Also available is a kit that will allow use of the oval type carb filters and a hex bar linkage.

Shipping to USA by Fedex or UPS is $50 whether 1 , 2 or 3 pairs

Paul H wrote:Basic 38mm thru 45mm are £350 ex tax which is about $520
That includes fuel rails,tps,and the ram pipes which accept 2 inch neck cone filters or turbo pipe.
The 48mm thru 54mm are a bit more because they have the larger radiused ram pipes to accept the 2 5/8 inch
neck filters- air filters are available from Bugpack.

Also available is a kit that will allow use of the oval type carb filters and a hex bar linkage.

Shipping to USA by Fedex or UPS is $50 whether 1 , 2 or 3 pairs

Those look great! I'm definitely keeping these in mind as my motor plans change.

i picked mine up on saturday lovely finish on all parts

dannyboy wrote:i picked mine up on saturday lovely finish on all parts

You lucky b*st*rd!
Awesome product development Paul! Kudos for that alone.

They seem to be extremely well suited for turbo use

Hi Paul, what is your product ability for a 62mm IDA ?

Lance

Redline Weber wrote:Hi Paul, what is your product ability for a 62mm IDA ?

Lance

Nil

The IDA stuff is out in a couple of months - max is 56mm

Those look great!

Oups too much click .....

I got my fix as well, these are great!

These look great.

They are, if you want options this is the only way to go!